English
 

Contact

堀井 秀之
113-8656
東京都文京区本郷7-3-1
東京大学工学部11号館3階
国際プロジェクト研究室
TEL: 03-5841-6090
FAX: 03-5841-7496
E-mail:

研究業績

書籍 / 雑誌論文 / 会議録


書籍 Books
  1. Y. Okui and H. Horii, "A micromechanics-based continuum theory for microcracking localization of rocks under compression", Continuum Models for Materials with Microstructure (Edited by H.-B. Muhlhaus), J. Wiley Interscience, Chapter 2 (1995) 28-68.
  2. 「工学は何をめざすのか−東京大学工学部は考える」(中島尚正編,東京大学出版会,2000年6月) 分担執筆
  3. 「問題解決のための『社会技術』」(堀井秀之著,中央公論新社,2004年3月)
  4. 「安全安心のための社会技術」(堀井秀之編,東京大学出版会,2006年1月)

雑誌論文 Periodicals
(リンクがはられているものは,別ウインドウでPDFファイルが開きます.)
acrobat

  1. H. Horii and S. Nemat-Nasser
    "Instability of a halfspace with frictional materials"
    Journal of Applied Mathematics and Physics (ZAMP), Vol.33 (1982) 1-16.
  2. S. Nemat-Nasser and H. Horii
    "Compression-induced nonplanear crack extension with application to splitting, exforiation, and rockburst"
    Journal of Geophysical Research
    , Vol. 87, No. B8 (1982) 6805-6821.
  3. H. Horii and S. Nemat-Nasser
    "Overall moduli of solids with microcracks: load-induced anisotropy"
    Journal of the Mechanics and Physics of Solids, Vol. 31 (1983) 155-171.
  4. S. Nemat-Nasser and H. Horii
    "Rock failure in Compression"
    International Journal of Engineering Science/Letters in Applied and Engineering Sciences
    , Vol. 22 (1984) 999-1011.
  5. H. Horii and S. Nemat-Nasser
    "Compression-induced micro-crack growth in brittle solids: axial splitting and shear failure"
    Journal of Geophysical Research, Vol. 90, No. B4 (1985) 3105-3125.
  6. H. Horii and S. Nemat-Nasser
    "Elastic fields of interacting inhomogeneities"
    International Journal of Solids and Structures
    , Vol. 21 (1985) 731-745.
  7. H. Horii and S. Nemat-Nasser
    "Brittle failure in compression: splitting, faulting, and brittle-ductile transition"
    Philosophical Transactions, Royal Society of London, Vol. A319, No. 1549 (1986) 337-374.
  8. H. Horii, A. Hasegawa, and F. Nishino
    "Mechanics of unstable crack initiation: effect of residual strain"
    Structural Eng./Earthquake Eng.
    (Proc. of JSCE) Vol. 3, No. 2 (1986) 215s-223s.
  9. K. Sahasakmontri, H. Horii, A. Hasegawa, and F. Nishino
    "Mechanical properties of solids containing a doubly periodic rectangular array of cracks"
    Structural Eng./Earthquake Eng.
    (Proc. of JSCE), Vol. 4, No. 1 (1987) 125s-135s.
  10. S. Gong and H. Horii
    "General solution to the problem of microcracks near the tip of a main crack"
    J. of the Mech. and Phys. of Solids
    , Vol. 37, No. 1 (1989) 27-46.
  11. Z. Shi and H. Horii
    "Microslip model of strain localization in sand deformation"
    Mechanics of Materials, Vol. 8 (1989) 89-102.
  12. K. Sahasakmontri and H. Horii
    "An analytical model of fatigue crack growth based on the crack-tip plasticity"
    Engineering Fracture Mechanics
    , Vol. 38, No. 6 (1990) 413-437.
  13. H. Horii and T. Ichinomiya
    "Observation of fracture process zone by laser speckle technique and governing mechanism in fracture of concrete" :
    Invited Paper,International Journal of Fracture, Special Issue on Fracture of Concrete and Advanced Cement-Based Materials, Vol. 51 (1991) 19-29.
  14. S. Nirmalendran and H. Horii
    " Analytical modeling of microcracking and bridging in the fracture of quasi-brittle materials"
    J. of the Mech. and Phys. of Solids
    , Vol. 40, No. 4 (1992) 863-886.
  15. M. Cai and H. Horii
    "A constitutive model of highly jointed rock masses"
    Mechanics of Materials
    , Vol. 13 (1992) 217-246.
  16. H. Yoshida and H. Horii
    "A micromechanics-based model for creep behavior of rock"
    Applied Mechanics Review, Vol. 45, No. 8 (1992) 294-303.
  17. H. Horii, H.C. Shin, and T.M. Pallewatta
    "Mechanism of fatigue crack growth in concrete"
    J. of Cement and Concrete Composites
    , Vol. 14 (1992) 83-89.
  18. Y. Okui, H. Horii, and N. Akiyama
    "A continuum theory for solids containing microstructures"
    International Journal of Engineering Science, Vol. 31, No. 5 (1993) 735-749.
  19. M. Cai and H. Horii
    "Constitutive model and FEM analysis of jointed rock masses"
    Int. J. Rock Mech. Min. Sci. & Geomech. Abstr.
    , Vol. 30, No. 4 (1993) 351-359.
  20. R. Premachandran and H. Horii
    "Micromechanics-based constitutive modeling of ice behaviors and FEM analysis for prediction of ice forces"
    Cold Regions Science and Technology
    , 23 (1994) 19-39.
  21. R. Premachandran and H. Horii
    "A micromechanics-based constitutive model for polycrystalline ice"
    Journal of Engineering Materials and Technology
    , ASME, Vol. 116 (1994) 392-397.
  22. Y. Okui, H. Horii and N. Akiyama
    “A micromechanics-based continuum theory and analysis of localization phenomena”
    J. of Structural Mechanics and Earthquake Engineering, JSCE, No. 501/I-29 (1994) 55-64 (in Japanese).
  23. H. Yoshida and H. Horii
    “Micromechanics-based continuum model for rock masses and analysys of the excavation of underground power cavern”
    Journal of Geotechnical Engineering
    , JSCE, No. 535/III-34 (1995) 23-41 (in Japanese).
    吉田秀典,堀井秀之. マイクロメカニクスに基づく岩盤の連続体モデルと大規模空洞掘削の解析,土木学会論文集,No. 535/V-34 (1996) 23-41.
  24. P. Nanakorn and H. Horii
    "A fracture mechanics-based design method for SFRC tunnel linings"
    J. Materials, Conc. Struct., Pavements
    , JSCE, No. 532/V30 (1996) 221-233.
  25. P. Nanakorn and H. Horii
    “Back analysis of tension-softening relationship”
    J. Materials, Conc. Struct., Pavements,
    JSCE, No. 544/V32 (1996) 265-275.
  26. Kabele, P., Horii, H.
    “Analytical Model for Fracture Analysis of Pseudo Strain-Hardening Cementitious Composites”
    J. Materials, Conc. Struct., Pavements, JSCE, No. 532/V30 (1996) 209-219.
  27. H. Yoshida, H. Horii and Y. Uchida
    “Analysis of the excavation of underground power house at Okawachi power station by MBC model and comparison with measured data”
    Journal of Geotechnical Engineering, JSCE, No. 547/III-36 (1996) 39-56 (in Japanese).
    吉田秀典,堀井秀之,打田靖夫. マイクロメカニクスに基づく岩盤の連続体モデルによる大河内発電所地下発電所空洞掘削の解析と計測値との比較,土木学会論文集,No. 547/III-36 (1996) 39-56.
  28. Y. Okui and H. Horii
    “Stress and time-dependent failure of brittle rocks under compression: a theoretical prediction”
    J. Geophysical Research, Vol. 102, No. B7 (1997) 14869-14881.
  29. H. Yoshida and H. Horii
    “Excavation analysis of a large-scale underground power house cavern by micromechanics-based continuum model for jointed rock mass”
    International Journal of Rock Mechanics and Mining Science
    , Vol.34, No.3/4, (1997) paper No.352.
  30. J. Vychytil and H. Horii
    “Micromechanics-based continuum model for hydraulic fracturing of jointed rock masses during HDR stimulation”
    Mechanics of Materials, 28 (1998) 123-135.
  31. H. Yoshida, S. Hibino, H. Horii and K. Kudoh
    “A determination method of analytical parameter from convergences during excavation”
    Journal of Geotechnical Engineering, JSCE, No. 596/III-43 (1998) 11-27 (in Japanese).
    吉田秀典,日比野繁信,堀井秀之,工藤奎吾. トンネル掘削時の内空変位を用いた解析パラメータの同定法,土木学会論文集,No. 596/III-43 (1998) 11-27.
  32. H. Yoshida and H. Horii
    “Micromechanics-based continuum model for geological material”
    J. of Applied Mechanics, ASCE, Vol. 1 (1998) 527-536 (in Japanese).
    吉田秀典,堀井秀之. 地盤材料に対するマイクロメカニクスに基づく連続体モデル,応用力学論文集,Vol. 1 (1998) 527-536.
  33. J. Vychytil and H. Horii
    “Coupled flow-deformation analysis of hot dry rock stimulation”
    Geotherm. Sci. & Tech.
    , 6 (1999) 259-279.
  34. Kabele, P., Yamaguchi E., Horii, H.
    “FEM-BEM superposition method for fracture analysis of quasi-brittle structures”
    International Journal of Fracture,
    100 (1999) 249-274.
  35. Y. Okui and H. Horii
    “Application of Micromechanics to Modeling Compressive Failure of Rock”
    MSRI, Vol.6, No.2, pp.65-73 2000
  36. J.Inoue and H.Horii
    “Analysis of Localizaton in a structure based on the thermodynamics of irreversible process”
    Journal of Structural Mechanics and Earthquake Engineering, JSCE, No. 654/I-52
    (2000) 63-75.
  37. Victor.C Li, H.Horii, P.Kabele, T.Kanda, and Y.M.Lim
    “Repair and retrofit with engineered cementitious composites”
    Engineering Fracture Mechanics,
    65 (2000) 317-334.
  38. 澤田昌孝、堀井秀之、Jiri VYCHYTIL、吉田秀典
    MBCモデルによる肘折水圧破砕試験の解析
    土木学会論文集 No. 659/III-52, 129-139, 2000.
  39. 堀井秀之、宇野晴彦、吉田秀典、芥川真一、打田靖夫、森川誠司、山辺正、多田浩幸、
    京谷孝史、伊藤文雄
    節理性岩盤を対象とした各種解析手法による要素解析結果の比較
    土木学会論文集 No. 659/III-52, 229-240, 2000.
  40. 堀井秀之、宇野晴彦、吉田秀典、芥川真一、打田靖夫、森川誠司、山辺正、多田浩幸、
    京谷孝史、伊藤文雄
    等価連続体解析手法による塩原発電所空洞掘削時挙動の比較検討
    土木学会論文集 No. 659/III-52, 211-227, 2000.
  41. 澤田昌孝、堀井秀之、吉田秀典
    高温岩体発電における水圧破砕・循環試験の解析、
    土木学会論文集 No. 680/III-55, 109-121, 2001.
  42. 多田浩幸、石塚与志雄、堀井秀之、内田善久、柏柳正之、木全宏之
    不連続面を考慮したダム基礎岩盤の地震時安定性評価手法の提案
    土木学会論文集No.715/III-60, 201-213, 2002
  43. 柳沢賢、堀井秀之、星谷寛
    軟岩におけるすべり面の不安定進展開始条件
    土木学会論文集No.708/III-59, 41-52, 2002
  44. H.Horii and S.-C.Chen
    “Computational fracture analysis of concrete gravity dams toward engineering evaluation of seismic safety”
    Engineering Fracture Mechanics, 70 (2003) 1029-1045.
  45. K. Miura, Y. Okui and H. Horii
    “Micromechanics-based prediction of creep failure of hard rock for long-term safety of high-level radioactive waste disposal system”
    Mechanics of Materials, 35 (2003) 587-601.
  46. 山口健太郎・船戸康徳・藤代一成・堀井秀之
    社会問題の解決に資する事実の明示化手法の構築
    社会技術研究論文集、第一巻、9-15 、2003年
  47. 豊田武俊、堀井秀之
    構造モデル化手法の社会問題への適用
    社会技術研究論文集、第一巻、15-24、2003年
  48. 村山明生・古場裕司・舟木貴久・城山英明・畑中綾子・阿部雅人・堀井秀之
    既存不適格住宅の耐震性向上に係る社会技術の研究
    社会技術研究論文集、第一巻、338-351、2003年
  49. 小松崎俊作、橋口猛志、堀井秀之
    因果ネットワークを用いたリアルタイム診療ナビゲーションシステムの影響分析
    社会技術研究論文集、第一巻、391-403、2003年
  50. H. Yoshida and H. Horii
    “Micromechanics-based continuum model for a jointed rock mass and excavation analyses of a large-scale cavern”
    Int. J. Rock Mech. & Min. Sci., 41 (2004) 119-145.
  51. P. Jongpradist, K. Takeuchi, T. Shimura, and H. Horii
    “Rock mass deformational behaviors during the excavation of the large-scale NATM cavern in soft sedimentary formation”
    J. Geotech. Eng., JSCE, No. 764/III-67 (2004) 1-10.
  52. 古場裕司、白戸智、山口健太郎、堀井秀之
    社会問題解決策の影響分析手法確立に向けた研究〜既存不適格住宅耐震性向上問題を事例として
    社会技術研究論文集、第2巻、112-122、2004年
  53. 八巻心太郎、山口健太郎、白戸智、堀井秀之
    診療ナビゲーションシステムを題材とした社会問題解決策の影響分析ケーススタディ
    社会技術研究論文集、第2巻、123-131、2004年
  54. 山口健太郎、八巻心太郎、白戸智、堀井秀之
    社会問題解決策の設計と実装に資する多元的評価手法の提案
    社会技術研究論文集、第2巻、132-139、2004年
  55. 阿部敦壽、堀井秀之
    安全・安心社会の構築に向けた科学技術政策立案の支援手法の提案
    社会技術研究論文集、第2巻、238-250、2004年
  56. 山崎瑞紀、吉川肇子、堀井秀之
    高病原性鳥インフルエンザにおける不安喚起モデル構成の試み
    社会技術研究論文集、第2巻、379-388、2004年
  57. 我妻静香、藤代一成、堀井秀之
    原子力発電所トラブル隠し問題の解析に向けた階層的因果関係の対話的可視化
    社会技術研究論文集、第2巻、406-413、2004年
  58. 大森良太、堀井秀之
    シナリオ・プランニング手法による東アジアのエネルギー危機の分析と科学技術戦略の構築
    社会技術研究論文集、第3巻、1-10、2005年
  59. 中谷洋明、堀井秀之、村山明生、山口健太郎
    リスク特性とリスクガバナンス構造の類型化及び関係分析の試み
    社会技術研究論文集、第3巻、31-46、2005年
  60. 濱谷健太、堀井秀之、山崎瑞紀
    合意形成のための住民意識構造モデルの構築−道路整備事業を題材として−
    社会技術研究論文集、第3巻、128-137、2005年
  61. 山口健太郎, 白戸智, 堀井秀之
    社会問題解決策の立案に資する分野横断的な知識活用手法の検討
    社会技術研究論文集、第3巻、186-195、2005年
  62. 木全宏之、藤田豊、堀井秀之
    動的クラック進展解析による重力式コンクリートダムの耐震安全性評価
    土木学会論文集、No. 787/I-71, 137-145, 2005年
  63. 山口健太郎、村山明生、堀井秀之
    問題解決の設計手法に関する検討−防災投資報告制度の提案を通じて−
    社会技術研究論文集、第4巻、1-17、2006年
  64. 高木彩、山崎瑞紀、池田謙一、堀井秀之
    交通安全に関わる組織への社会的信頼とその構造 日本リスク研究学会誌、Vol.17 No.1、115-122、2007年

会議録 Proceedings
  1. H. Horii and S. Nemat-Nasser
    "Curved crack growth in brittle solids under farfield compression"
    1982 Advances in Aerospace Structures and Materials, AD-03, edited by R.M.Laurenson and U.Yuceoglu, ASME, (1982) 75-81.
  2. S. Nemat-Nasser and H. Horii
    "Growth of microcracks in rocks, and load-induced anisotropy"
    Hydraulic Fracturing and Geothermal Energy (Proceeding of the 1st Japan-U.S. Joint Seminar, Tokyo, and Post-Seminar Symposium, Sendai, Japan, Nov. 1982), edited by S. Nemat-Nasser, H. Abe, and S. Hirakawa, Martinus Nijhoff (1983) 519-528.
  3. H. Horii and S. Nemat-Nasser
    "Estimate of stress intensity factors for interacting cracks"
    1983 Advances in Aerospace Structures, Materials and Dynamics, AD-06, edited by U.Yuceoglu, R.L.Sierakowski, and D.A.Glosgow, ASME, (1983) 111-117.
  4. S. Nemat-Nasser and H. Horii
    "Micro-mechanics of fracture and failure of geo-materials in compression"
    Advances in Fracture Research (Proceedings of the 6th International Conference of Fracture [ICF6], New Delhi, India, Dec. 1984), Vol. 1 Pergamon Press (1984) 515-524.
  5. H. Horii, A. Hasegawa, and F. Nishino
    "The effect of the residual strain on the crack initiation"
    Fracture Control of Engineering Structures (Proc. of ECF6, Amsterdam, the Netherlands, Jun. 1986) edited by H.C. van Elst and A. Bakker, EMAS, U.K., Vol. 1 (1986) 319-334.
  6. H. Horii and S. Nemat-Nasser
    "Effect of crack-tip plastic zone on kinked or branched crack growth"
    Fracture Control of Engineering Structures (Proc. of ECF6, Amsterdam, the Netherlands, Jun. 1986) edited by H.C. van Elst and A. Bakker, EMAS, U.K., Vol. 3 (1986) 2169-2184.
  7. H. Horii and K. Sahasakmontri
    "Is the fabric tensor sufficient?"
    Micromechanics of Granular Materials (ed. by M. Satake and J.T. Jenkins) Elsevier, Proceedings of US-Japan Seminar on Micromechanics of Granular Materials, Oct. 26-30, 1987, Sendai & Zao, Japan (1988) 91-94.
  8. H. Horii
    "BIEM for crack problems and application to fracture process zone in concrete, ceramics and rock"
    Boundary Element Methods in Applied Mechanics (ed. by M. Tanaka and T.A.Cruse) Pergamon Press, Proceedings of First Joint Japan/U.S. Symposium on Boundary Element Methods, Oct. 3-6, 1988 Tokyo, (1988) 129-138.
  9. H. Horii, A. Hasegawa, and F. Nishino
    "Fracture process and bridging zone model and influencing factors in fracture of concrete"
    Fracture of Concrete and Rock, Proceedings of SEM-RILEM International Conference (ed. by S.P. Shah and S.E. Swartz) Houston, Texas, June 1987 (1989) 205-219.
  10. H. Horii
    "Source of size effect and process zone model"
    Proceedings of MRS International Meeting on Advanced Materials, May 30-June 3 1988 Tokyo, Material Research Society, Vol. 5 (1989) 419-424.
  11. K. Sahasakmontri and H. Horii
    "Mechanics of cracked solids"
    Proceedings of MRS International Meeting on Advanced Materials, May 30-June 3 1988 Tokyo, Material Research Society, Vol. 5 (1989) 455-459.
  12. S. Gong and H. Horii
    "Interaction model of microcracking zone"
    Proceedings of MRS International Meeting on Advanced Materials, May 30-June 3 1988 Tokyo, Material Research Society, Vol. 5 (1989) 461-466.
  13. H. Horii, Z. Shi, and S. Gong
    "Models of fracture process zone in concrete, rock, and ceramics"
    Cracking and Damage, Strain Localization and Size Effect, Proceedings of the France-US Workshop on 'Strain Localization and Size Effect Due To Cracking and Damage', Cachan, France, 6-9 Sep. 1988, (1989) 104-115.
  14. H. Horii and Z. Shi
    "Application of fracture mechanics to strain localization mechanism"
    Advances in Fracture Research, Proceedings of the International Conference on Fracture (ICF7), Houston, 20-24 Mar. 1989, Vol. 1 (1989) 341-348.
  15. H. Horii and K. Sahasakmontri
    "Mechanical properties of cracked solids: validity of the self-consistent method"
    Micromechanics and Inhomogeneity, The Toshio Mura Anniversary Volume edited by G.J. Weng, M. Taya, and H. Abe, Springer, (1989) 137-159.
  16. H. Horii
    "Models of fracture process zone and a system of fracture mechanics for concrete and rock", Fracture Toughness and Fracture Energy - Test Methods for concrete and rock -, H. Mihashi, H.Takahashi, and F.H. Wittmann, ed., Balkema (1989) 409-422.
  17. H. Horii
    "Application of fracture mechanics to concrete, rock, and ceramics"
    Theoretical and Applied Mechanics, University of Tokyo Press, Vol. 38 (1989) 121-129.
  18. H. Horii and S. Nirmalendran
    "Roles of microcracking and bridging in fracture of quasi-brittle materials"
    Micromechanics of Failure of Quasi-Brittle Materials, Edited by S.P. Shah, S.E. Swartz, and M.L. Wang, Proc. of Int. Conf. on Micromechanics of Failure of Quasi-Brittle materials, June 1990, Albuquersque, New Mexico, Elsevier, (1990) 569-578.
  19. T.M. Pallewatta, M. Tada, and H. Horii
    "Measurement of surface displacement field of concrete by laser speckle method"
    Proc. of the Japan Concrete Institute, Vol. 12, No. 2 (1990) 835-840.
  20. H. Horii, H.C. Shin, and T.M. Pallewatta
    "An analytical model of fatigue crack growth in concrete"
    Proc. of the Japan Concrete Institute, Vol. 12, No. 2 (1990) 841-846.
  21. H. Horii
    "Mechanisms of fracture in brittle disordered materials"
    Fracture Processes in Concrete, Rock and Ceramics, Proc. of Int. Conf. on Fracture Processes in Brittle Disordered Materials Chapman and Hall, Vol. 1 (1991) 95-110.
  22. Y. Okui, H. Horii, J. Satou and N. Akiyama
    "A Continuum theory based on micromechanics for interacting damage"
    Proc. of Localized Damage 92, July 1-3, 1992, Southampton, U.K., Computational Mechanics Pub., Southampton Boston, Vol. 2 (1992) 439-451.
  23. Y. Okui, H. Horii, and N. Akiyama
    "A micromechanics-based continuum theory for strain localization and softening under compression", Fracture Mechanics of Concrete Structures, Proc. of First Int. Conf. on Fracture Mechanics of Concrete Structures, June 1-5, 1992, Breckenridge, Colorado Edited by Zdenek P. Bazant, Elsevier Applied Science (1992) 275-280.
  24. H. Horii
    "Micromechanics and localization in concrete and rock"
    Proceedings of the 2nd International conference on "Fracture and Damage of Concrete and Rock", Nov. 9-13, 1992, Vienna, Austria, E & F N SPON, London (1993) 54-56.
  25. P. Kabele, E. Yamaguchi, and H. Horii
    "Analysis of concrete structures by FEM-BEM superposition method"
    Computational Mechanics (ed. by Valliappan, Pulmano & Tin-Loi ), Balkema, Rotterdam (1993) 763-768.
  26. H. Horii and P. Nanakorn
    "Fracture Mechanics Based Design of SFRC Tunnel Lining"
    Size Effect in Concrete Structures, Proceedings of JCI International Workshop, Oct. 31 - Nov. 2, 1993, Sendai, Japan (ed. by H. Mihashi, H. Okamura, and Z. P. Bazant), E & FN Spon (1994) 429-440.
  27. H. Horii and Y. Okui
    "Thermomechanics and micromechanics-based continuum theory for localization phenomena"
    Proceedings of IUTAM Symposium on Fracture of Brittle Disordered Materials: Concrete, Rock and Ceramics, 20-24 Sept. 1993, Brisbane, Australia, E & FN Spon (1994) 391-405.
  28. H. Horii and Y. Okui
    "Micromechanics-based continuum theory and numerical analysis of localization phenomena"
    Computer Methods and Advances in Geomechanics, Siriwardane & Zaman (eds), Proceedings of the eighth International Conference on Computer Methods and Advances in Geomechanics, West Virginia, U.S.A., 22-28 May 1994, Balkema (1994) 1687-1692.
  29. H. Yoshida and H. Horii
    "A constitutive equation and FEM analysis of rock masses containing fracturing joints"
    Computer Methods and Advances in Geomechanics, Siriwardane & Zaman (eds), Proceedings of the eighth International Conference on Computer Methods and Advances in Geomechanics, West Virginia, U.S.A., 22-28 May 1994, Balkema (1994) 1717-1722.
  30. H. Horii and H. Yoshida
    "Constitutive modeling of rock masses containg fracturing joints and analysis of large-scale excavation"
    Rock Mechanics - Models and Measurements - Challenges from Industry, Proceedings of the 1st North American Rock Mechanics Symposium, The University of Texas at Austin, 1-3 June, 1994, Balkema (1994) 681-688.
  31. P.Nanakorn and H.Horii
    "A Fracture Mechanics-Based Design Method for SFRC Tunnel Lining"
    Proceedings of the South East Asian Symposium on Tunnelling and Underground Space Development, Japan Tunnelling Association (1995) 71-78.
  32. H. Horii, P. Nanakorn and P. Kabele
    “Application of fracture mechanics to design of SFRC tunnel linings and development of strain-hardening cementitious composites”
    Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS-2, edited by H. Wittmann, AEDIFICATIO Publishers, D-79104 Freiburg (1995) 1345-1360.
  33. Nanakorn, P. and Horii, H.
    “A finite element with embedded displacement discontinuity”
    Proceedings of the 5th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-5), Wollongong, NSW,Australia, 25-27 July 1995, Giffith University (Gold Coast Campus), Australia, Vol 1 (1995) 33-38.
  34. P. Kabele and H. Horii
    "Analytical modeling and fracture analysis of engineered cementitious composites"
    Proceedings of the 5th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-5), Wollongong, NSW,Australia, 25-27 July 1995, Giffith University (Gold Coast Campus), Australia, Vol 3 (1995) 2173-2178.
  35. H. Yoshida, H. Horii and H. Uno
    “Micromechancis-based continuum theory for jointed rock mass and analysis of large-scale cavern excavation”
    Proceedings of Eighth International Congress on Rock Mechanics, Tokyo, Japan, 1995, A.A. Balkema, Vol. 2 (1995) 689-692.
  36. P. Nanakorn and H. Horii
    “A fracture mechanics-based design method for the estimation of the sectional capacity of SFRC tunnel linings”
    J. of The Graduate School and Faculty of Engineering, The Univ. of Tokyo (B), Vol. XLIII, No. 4 (1996) 365-395.
  37. P. Kabele and H. Horii
    “Finite element analysis of fracture behavior of ECC shear beams”
    Materials for the New Millenium (Proceedings of the Fourth Materials Engineering Conference, ASCE), K.P. Chong (ed.), ASCE, Vol. 1 (1996) 409 - 418.
  38. P. Nanakorn and H. Horii
    “A fracture mechanics-based design method for SFRC tunnel linings”
    Materials for the New Millenium (Proceedings of the Fourth Materials Engineering Conference, ASCE), K.P. Chong (ed.), ASCE, Vol. 1 (1996) 819-828.
  39. H. Horii and J. Inoue
    “New directions : analysis of cracking localization and ultimate strength of structures in civil engineering”
    Advances in Fracture Research, Proc. of the Ninth Int. Conf. on Fracture, 1-5 April 1997, Sydney, Australia, Pergamon, Vol. 4 (1997) 1873-1884.
  40. H. Yoshida, H. Horii, and K. Kudo
    “Excavation analysis of a large-scale power station cavern by micromechanics-based continuum model for jointed rock mass”
    Proceedings of the First Asian Rock Mechanics Symposium, Balkema (1997) 311-316.
  41. P. Kabele, V.C Li, H. Horii, T. Kanda, S. Takeuchi
    “Use of BMC for Ductile Structural Memebers”
    Proc. Int. Symp."Brittle Matrix Composites 5" A.M. Brandt,V.C. Li, I.H. Marshall eds. BIGRAF and Woodhead Publ., Warsaw (1997) 579-588.
  42. H. Horii, K. Takamatsu, J. Inoue, and N. Sasaki
    “Measurement of displacement field by “Matching Method” and observation of strain localization in soft rock"
    Proceedings of Second International Conference on Imaging Technologies, Davos Switzerland, May 25-30, edited by J.D. Frost and S. McNeil, ASCE (1998) 10-19.
  43. H. Horii, J. Inoue and M. Brocca
    "Thermomechanics Based Theory and Analysis of Cracking Localization in Concrete Dam under Earthquake Excitation"
    Material Instabilities in Solids, R. de Borst and E. van der Giessen eds., John Wiley & Sons, Chapter 9 (1998) 125-136.
  44. Y. Okui and H. Horii
    "Mechanism of microcracking localization of compressive rocks: anisotropic interaction between microcracks"
    Proceedings of the Fourth International Workshop on Localization and Bifurcation Theory for Soils and Rocks, Gifu, Japan, 28 September - 2 October 1997.
    Localization and Bifurcation Theory for Soils and Rocks, Adachi, Oka & Yashima (eds), Balkema (1998) 143-151.
  45. T. Okada and H. Horii
    "Effect of specimen size and loading rate on the tension-softening curve obtained by back analysis method"
    Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS-3, AEDIFICATIO Pub., Germany (1998) 89-100.
  46. H. Yoshida and H. Horii
    "Micromechanics-based continuum analysis for the excavation of large-scale underground cavern"
    Proc. of SPE/ISRM Rock Mech. in Petro. Eng., 8-10 July 1998, Trondheim, Norway, 1 (1998) 209-218.
  47. H. Horii, P. Kabele, S. Takeuchi, V.C. Li, S. Matsuoka and T. Kanda
    “On the prediction method for the structural performance of repaired/retrofitted structures”
    Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS-3, AEDIFICATIO Pub., Germany (1998) 1739-1750.
  48. 谷村大三郎、西尾誠高、深井直光、今田徹、堀井秀之
    導水路トンネルの内巻鋼管の変形に関する検討−水戸トンネルの事例−
    トンネル工学研究論文・報告集第10巻、245-250、2000年
  49. H.M.Kim,M.Kuwabara,J.Inoue and H.Horii
    “Evaluation of the change in permeability of jointed rock mass due to excavation using micromechanics- based continuum (MBC)model”
    Rock Mechanics in the National Interest,Swets &Zeitlinger Lisse (2001) 721-728.
  50. H.Yoshida, H.Horii and T.Kaneko
    “Analysis of disposal tunnel for high-level radioactive waste by micromechanics-based continuum model”
    Rock Mechanics in the National Interest,Swets &Zeitlinger Lisse (2001) 551-558.
  51. S. Azuma, I. Fujishiro, and H. Horii
    “Hierarchical causality explorer: making complemental use of 3D/2D visualizations”Visualization and Data Analysis 2006, Proc. of SPIE-IS&T Electronic Imaging, SPIE Vol. 6060 (2006) 60600H-1-10.

Copyright (c) 2007 Hideyuki Horii. All rights researved.